How to Stain and Seal a Wood Pergola – Pergola Genius

How to Stain and Seal a Wood Pergola

Posted on February 15, 2018 By

If you are usually creating a wood pergola, you may want to consider staining plus sealing the lumber prior to the pergola is constructed. This article displays products that work beautifully upon a modern two-town pergola, mainly because well as how to use them effectively.

View in gallery

View in gallery

It should be mentioned here that staining and closing a wood pergola, deck, or even other outdoor structure doesn’t need two separate coats of spot after which sealant. In fact, the particular opposite is true. Stain isn’t like paint, in that it’s better to do two or even three coats for optimum insurance. Stain penetrates to the wood plus actually changes the wood alone. It must be absorbed in to the wood. Anything you place on top of the spot â€? even another coat associated with stain â€? won’t be capable to absorb to the wood such as the first coat, so you’ll just end up with the slimy or tacky surface forevermore.

View in gallery

One thorough yet sparing coat of stain + sealer is the perfect shielding covering for wood surfaces. Very clear sealant offers the water- and weather-proofing element that stain does, yet without the UV protection. Therefore the color of your clear-sealed wood will eventually change to some greyed-out version.

View in gallery

If you know what stain a person want to use prior to the pergola is constructed, it is easier to stain your lumber now. In this instance, lay all of your planks to be stained on several scrap 2x4s or something otherwise elevated. Be sure the terrain are designed for some drips; grass, dust, and even concrete underneath will probably get a little stain upon them.

View in gallery

Use the medium sandpaper (180-grit was utilized in this example) to gently sand all sides of your own pergola boards. This takes several time, but it’s important in order to open up the wood skin pores to let the stain enter deeply.

View in gallery

The rafters on this wood pergola can be a natural stain (Sikkens ProLuxe, available at our nearby paint store), and the body of the pergola will end up being matte semi-transparent black.

View within gallery

Use a 4� brush plus, keeping a wet edge, clean your stain evenly onto the particular lumber. Apply in an one thin but thorough coat together the grain, taking care in order to avoid brush marks. These can be visible following the stain provides absorbed into the wood plus dried, so the more that can be done to apply an even layer of stain, the better your own end result will be.

View in gallery

Allow the stain in order to dry thoroughly, probably 24-72 hrs depending on your climate, heat, and humidity.

View in gallery

You’ll also want to brush apart drips over the side of your own boards before they dry. (The actual application of stain is definitely detailed more thoroughly later within this article with the pergola frame’s staining. ) Rotate the particular lumber and apply stain within the same way on all sides, allowing thorough drying in between applications. When the stain provides thoroughly dried on all edges of the lumber, you’re ready in order to install the rafters onto your own wood pergola.

View in gallery

While there are many brands plus types of wood stain, Cabot is a great choice available at many hardware stores. You’ll need in order to choose between semi-solid and strong stain. Essentially, solid stain provides an opaque look that is similar to paint. Semi-solid, which is exactly what this example uses, provides the staining color but allows the particular wood grain to show by means of. It’s less saturated than strong stain.

View in gallery

Use the natural brush which is proportionate in order to the lumber you’re staining. Right after stirring the stain perfectly, drop the bottom half of your own bristles into the stain.

View in gallery

Apply it onto your own lumber in long, even shots. You’ll want to apply the particular stain in small sections in a time. Don’t overbrush. The particular more you brush the spot, the more likely you will find brush strokes after it dries, even with the semi-solid spot.

View in gallery

If your wood is normal, it will probably come with an imperfection or two. In order to minimize the look of these defects after the stain has dried out, load up some stain on your brush and dab the bristle tips into the imperfection.

View in gallery

After the lumber flaw continues to be saturated, continue your lengthy brush strokes down the table. View in gallery

Before the spot starts to dry, stain the particular sides of the board in order to brush away any drips. This particular is important to do today while the stain is clean, because if the drips are usually allowed to dry, they can be obvious (darker) and appear odd on your pergola.

View in gallery

Repeat this staining procedure on the top and edges of of your boards. Dual check for brush strokes and drips or something that doesn’t appearance seamless in your stain finish off.

View in gallery

You don’t require to worry about the finishes of your lumber at this particular point, unless you have reduce your wood to size. The particular benefit of cutting your wooden to size before installing the particular pergola wood is that you simply don’t waste materials any stain. Drawback is that a person don’t have even 1/2â€? associated with wiggle room in construction, have to you need it. This example of this will trim the boards through construction.

View in gallery

Allow this stain to dry completely, in least 24 hours. Don’t make it get wet or grubby during that time, that will certainly significantly affect the stain finish off.

View in gallery

When the spot has dried thoroughly, flip this boards over and repeat this process on the undersides involving your lumber. Remember to discolor in long, even strokes, plus look for drips down the edges again.

View in gallery

With this stain fully absorbed and dried, you are prepared to build your own pergola. Of course, you may always apply stain after this pergola is built following these types of steps. Just keep in thoughts that any transition from 1 stain to the next (for a two-tone pergola like this particular one) isn’t like paint, just where one coat of stain may be applied loosely or sloppily with the expectation the alternative coat of stain covers the idea up. Stain doesn’t work just like paint.

View in gallery

Although you could be anxious to get moving with the construction of your redwood pergola, if you have the choice, it’s highly recommended that an individual stain first. When it’s just about all built, you’ll be glad an individual did. Hopefully you find this particular article on how to discolor and seal a wood pergola helpful, and that you are usually able to create a stunning yard feature that will strengthen your outdoor standard of living for {years|many years|yrs|decades|several yea

Pergola DesignsPergola DIYPergola Ideas Tips