14×16 Pavilion Roof Plans | MyOutdoorPlans

Posted on December 17, 2017 By

This step by step diy woodworking project is about a 14×16 outdoor pavilion roof plans. This really is PART 2 of the rectangular pavilion project, where I show you how to build the top and how to attach the railings. This pavilion would be a great addition to any backyard, as it comes out with a nice design and with lots of space for the table with a few sofas. Have a look over the rest of my woodworking plans, if you need to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight minus any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, because it will pay off on the long run. Make use of a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all of the materials and tools required for the project, you could get the job done in in regards to a day.

 

 

Projects made from these plans

Add-image

 

 

14×16 Pavilion Roof Plans

Building a 14x16 pavilion

Building a 14×16 pavilion

 

  • E â€? 2 bits of 6×6 lumber â€? 40 3/4â€? long, 1 piece â€? 216â€? long TOP RIDGE
  • F â€? 26 bits of 2×6 lumber â€? 120â€? long RAFTERS
  • G â€? 4 pieces of 3/4â€? plywood â€? 12″x96â€? long, 4 pieces â€? 12″x21 3/4â€? long, 6 pieces â€? 48″x96â€? long, 4 pieces â€? 48″x48â€? long, 4 pieces â€? 21 1/4″x96â€? long ROOF
  • H â€? 400 sq ft of tar paper, 400 sq ft of asphalt shingles ROOFING
  • H â€? 2 pieces of 1×8 lumber â€? 216â€? long, 4 pieces â€? 121 1/4â€? long TRIMS
  • I â€? 8 pieces of 2×6 lumber â€? 87 3/4â€? long, 19 bits of 2×2 lumber â€? 36â€? long, 4 pieces of 2×6 lumber â€? 75 3/4â€? long, 15 pieces â€? 36â€? long RAILINGS

  • 2 bits of 6×6 lumber â€? 8â€? *************************)
  • 1 piece of 6×6 lumber â€? 18â€? *************************)
  • 26 pieces of 2×6 lumber â€? 10â€? *************************)
  • 4 pieces of 1×8 lumber â€? 12â€? *************************)
  • 2 pieces of 1×8 lumber â€? 18â€? *************************)
  • 12 bits of 3/4â€? plywood â€? 4’x8â€? *************************)
  • 400 sq ft of tar paper, 400 sq ft of asphalt shingles
  • 12 pieces of 2×6 lumber â€? 8â€? *************************)
  • 28 bits of 2×2 lumber â€? 6â€? *************************)
  • rafter ties
  • 1 5/8â€? screws, 2â€? nails 
  • wood glue, stain/paint

 One day

 

 

 

 

How to construct a 14×16 pavilion roof

Ridge beam

Ridge beam

The first step of the project is to build the ridge beam for the pavilion. Consequently , mark the cut lines towards the 6×6 beam and then make parallel cuts inside the areas. Set the saw at 2 3/4â€? depth make the cuts. Remove the excess having a chisel and smooth the recess with sandpaper.

Fitting the ridge beam

Fitting the ridge beam

Fit the 6×6 supports to the front and back top plates. Make sure the corners are square and then plumb the supports with a spirit level. Use hardware to secure the supports into place.

Fitting the ridge beam braces

Fitting the ridge beam braces

Fit 6×6 braces to the ridge beam. Make 45 degree cuts to both ends of the braces and then lock them into place with 3 1/2â€? screws.

Building the rafters

Make 26. 6 degree cuts to both ends of the 2×6 rafters. Mark the cut lines towards the rafters and then get the job done with a circular saw. Smooth the edges with sandpaper.

Fitting the rafters

Fitting the rafters

Fit the rafters towards the top of the pavilion, using the information in the diagram. It is important to space the rafters properly, otherwise you won’t have the ability to attach the roofing sheets. Use rafters ties to lock the beams into place.

 

 

Roof sheets

Roof sheets

Use 3/4� plywood for the roof from the pavilion. Cut the sheets on the right dimensions and then lay these to the top of the pavilion. Leave no gaps between the sheets and then insert 1 5/8� screws, every 8� across the rafters, so you can secure them into place tightly.

Side roof trims

Side roof trims

Fit 1×8 trims to the sides of the pavilion. Align the edges with attention and insert 2â€? nails to lock them into place tightly.

Front and back roof trims

Front and back roof trims

Fit the 1×8 trims to the front and back from the pavilion. Make the angle cuts towards the trims before locking them into place with 2â€? nails.

Fitting the roofing

Fitting the roofing

Cover the roof with tar paper and after that install the asphalt shingles. Be sure you also install the appropriate drip edges, so you can seal the shed roof. Read the manufacturer’s instructions for a tight fit.

Side railing panels

Side railing panels

Build the railings for your pavilion from 2×6 and 2×2 lumber. Drill pilot holes with the rails and insert 2 1/2â€? screws into the balusters. Place a wood block between the balusters to create even gaps.  Drill pocket holes at both ends of the 2×6 rails.

Front and back railings

Front and back railings

Repeat the process for the front and back railings. Drill pocket holes at both ends from the 2×6 rails.

Fitting the railings

Fitting the railings

Fit the railings to the pavilion, as show within the diagram. Cut wooden pieces to 4� and then fit them underneath the railing. Insert 2 1/2� screws through the pocket holes to secure the railings to the posts.

 

14x16 Pavilion Plans - Front view

14×16 Pavilion Plans â€? Front view

Fill the holes with wood putty and allow them to dry out for a few hours. Smooth the area with 100-200 grit sandpaper and remove the residues with a damp cloth. Apply a few coats of stain or paint to enhance the look from the pavilion.

14x16 Pavilion Plans

14×16 Pavilion Plans

Don’t forget to take a look over PART 1 of the project, and that means you learn how to build the frame from the 14×16 pavilion. This pavilion is sturdy and it features a very elegant design that puts and focus on cost efficiency and durability. You can add railings to the exterior of the pavilion.

 

 

This woodworking project was about 14×16 backyard pavilion roof plans.  If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result. (

Pergola DesignsPergola DIYPergola Ideas Tips